Baumatic BHC925SS Manuale Utente

1BHC925SS 90 cm Front touch control ceramic hob

Control panel layout 1. ON/OFF button 2. Safety lock button 3. Safety lock neon 4. Minus button 5. Plus button 6. Cooking zone indicator 7. Co

Using the ceramic hob Before first use IMPORTANT: You should clean the ceramic hob surface (see “Cleaning and maintenance” section). o You should

Turning on a zone and setting a power level IMPORTANT: A zone must be selected within 10 seconds of turning the hob on. o Press the

o Press the plus button (5) for the zone that you want to use. The preset hob zone level is setting number 4. o Adjust the zone betw

o The outer circuit will then switch off. o For the triple zone, if you have all three zones in use, you will need to follow this procedure twice.

Turning the hob off Once you have switched off all of the cooking zones, you should turn off the hob. o Press the ON/OFF button (1). It is p

Locking the hob top o The whole hob top can be locked by pressing the safety lock button (2) whilst the appliance is turned on. o The

LEVEL TIME LIMIT 1 8 hours 40 minutes 2 6 hours 42 minutes 3 5 hours 18 minutes 4 4 hours 20 minutes 5 3 hours 32 minutes 6 2 hours 50 minutes

o Once the automatic pre-heating time period is over, the hob will beep once and only the actual power level will show on the cooking zone indicator

Switching off automatic pre-heating o If a zone is already within automatic pre-heating mode, it is possible to cancel it. The “A” symbol needs to

User Manual for your Baumatic BHC925SS 90 cm Front touch control 5 hyperspeed zone ceramic hob. 2 NOTE: This User Instruction Manual contai

The recall function o If you have accidentally turned off the hob using the ON/OFF button (1). Then you can recall the power levels and zones that y

o If you have no zone in use and set the countdown timer, after a few seconds the hob will switch off. You will need to use the ON/OFF button (1) to

The hob timer (multiple timer programming) o When a hob zone has already been linked to the timer and the timer is counting down, sel

23o The positions where the heat will radiate from are clearly marked on the hob top. The saucepans must be positioned exactly on these zones for ef

Cleaning and maintenance Cleaning operations must only be carried out when the hob is cool. The appliance should be disconnected from your mains su

Using a ceramic hob scraper Your appliance will be provided with a hob scraper. The following guidelines should also be followed when using the ceram

Positioning The adjacent furniture must be able to withstand a minimum temperature rise of 85°C above the ambient temperature of the room it is locat

Installing the appliance o Cut a hole in the worktop that corresponds with the drawing shown above. o IMPORTANT: A partitio

o IMPORTANT: Do not use a silicon sealant to seal the appliance against the cut-out. This will make it difficult to remove the hob from the aperture

Electrical connection This appliance must be installed by a qualified person in accordance with the latest edition of the I.E.E. Regulations and in c

3Contents Environmental note 4 Important safety information 5 – 8 Specifications 8 - 10 Product and aperture dimensions 8 P

o The brass links must be positioned as marked in the appropriate diagram and once established ALL terminal screws must be tighten

o Unscrew the terminal screws fixing the cable. o Replace the cable with one of the same length and in accordance with the specification gi

o A humming sound is heard when a cooking zone is selected. * This is normal; the sound will disappear when the zone heats up. o The cooking zone

33 United Kingdom Baumatic Ltd., Baumatic Buildings, 6 Bennet Road, Reading, Berkshire RG2 0QX United Kingdom Sales Telephone (0118) 933 6900 Sales

34

35

36

Environmental note 4 o The packaging materials that Baumatic uses are environmentally friendly and can be recycled. all packaging mat

5Important safety information Your safety is of the utmost importance to Baumatic. Please make sure that you read this instruction booklet before at

6hild Safety any time. During and after use, all surfaces will become hot. se ensure that they are kept under close supervision at all times. uld o

7leaning Cleaning of the hob should be carried out on a regular basis. appliance, it should be disconnected from the mains and cool. using this ap

o Pans should be lifted on and off the hob surface and not dragged. o Cooking zones should not be switched on without cookware placed on them. Also

Standard accessories o Ceramic hob scraper Electrical details Rated Voltage: 230 Vac 50 Hz Supply Connection: 40 A (double pole switched fuse