Baumatic P90SS Manuale Utente

1P75SS/P76SS/PF75SS Pythagora 75cm gas hob P90SS Pythagora 90cm gas hob

Gas hob surface layout P75SS, PF75SS & P90SS P76SS 10

Using the gas hob IMPORTANT: You should clean the hob surface (see “Cleaning and maintenance” section). The following symbols will appear on the con

Energy saving tips o The diametre of the bottom of the pan should correspond to that of the burner. o The burner flame must never ext

Cleaning Cleaning operations must only be carried out when the hob is cool. The appliance should be disconnected from your mains supply before comme

o IMPORTANT: Make sure that you reassemble the burners in the original way. Installation The installation must be carried out by a CORGI registered

Positioning The adjacent furniture must be able to withstand a minimum temperature rise of 85°C above the ambient temperature of the room it is locat

Unpacking the appliance When unpacking the appliance please check that the following items are contained within the packaging: 1 x Baumatic hob 2 x

o Cut a hole in the worktop that corresponds with the drawing shown above and on the previous page. o IMPORTANT: You must have a gap of at

(A) Sealing strip (B) Clamp (C) Screw o Place the clamp (B) over the holes that match the size of the screws. There are one se

Gas connection 19 nts. This appliance must be installed by a competent person in accordance with the current versions of the following UK (United Ki

User Manual for your Baumatic P75SS/P76SS Pythagora 5 burner 75cm gas hob PF75SS Flush mounted Pythagora 5 burner 75cm gas hob P90SS Pythagora 5 burn

20Ventilation requirements o The room containing the cooker should have an air supply in accordance with the current edition of BS 5440: Part 2:

Gas Safety (Installation and Use) Regulations IMPORTANT: The appliance MUST be connected to the gas supply by use of a ½ BSP Elbow, seal, copper pipe

Gas adjustment (Conversion to LPG) All work must be carried out by a CORGI registered engineer. IMPORTANT: Always isolate the cooker from the electr

Minimum flow adjustment for hob gas taps. All work must be carried out by a CORGI registered engineer. IMPORTANT: Always isolate the hob from the e

Gas tap maintenance These maintenance operations MUST ONLY be carried out by a CORGI registered engineer. IMPORTANT: Before carrying out any mainten

Electrical connection This appliance must be installed by a qualified person in accordance with the latest edition of the I.E.E. Regulations and in c

My appliance isn’t working correctly IMPORTANT: If your appliance appears not to be operating correctly, then you should disconnect it from your main

27 United Kingdom Baumatic Ltd., Baumatic Buildings, 6 Bennet Road, Reading, Berkshire RG2 0QX United Kingdom Sales Telephone (0118) 933 6900

28

3Contents Environmental note 4 Important safety information 5 – 7 Specifications 8 Product & Aperture dimensions 8 Produc

Environmental note 4 o Baumatic uses are environmentally friendly and can be recycled. o all packaging material with due regard for

5Important safety information Your safety is of the utmost importance to Baumatic. Please make sure that you read this instruction booklet before at

6hild Safety o d ny time. During and after use, all surfaces will become hot. o se ensure that they are kept under close supervision at all times.

o Great care should be taken whilst using this appliance and when following the cleaning procedure. o You should not use a steam jet or any other h

Specifications P75SS & P76SS Product dimensions: Height: 500 mm Width: 740 mm Depth: 35 mm Aperture dimensions: Height: 480 mm Width: 56

9Product specifications: o 1 x 4.20 kW Hypergas burner o 1 x 3.00 kW rapid burner o 2 x 1.75 kW semi-rapid burners o 1 x 1.00 kW auxiliary burne