Baumatic BHG602TCSS Manuale Utente Scaricare il pdf (Pagina 19)

Gas Safety (Installation and Use) Regulations

IMPORTANT: The appliance MUST be connected to the gas

supply by use of a 15 mm x ½” female coupler, seal, copper

pipe and an isolation tap fitted in an easily accessible position.

o It is the law that all gas appliances are installed by competent

persons in accordance with the current edition of the Gas Safety

Installation and Use Regulations.

o It is in your interest and that of safety to ensure compliance with

the law.

o In the UK, CORGI registered installers work to safe standards of

practice. The hob must also be installed in accordance with

the current edition of BS 6172. Failure to install the cooker

correctly could invalidate the warranty, liability claims and lead

to prosecution.

o Put the gas seal inside of the 15 mm x ½” female coupler.

o Fully tighten the 15 mm x ½” female coupler and seal onto the

gas rail.

o IMPORTANT: The female coupler must be positioned the right

way up, as shown in the picture above.

o Gas pressure may be checked on a semi-rapid hob burner.

Remove the appropriate injector and attach a test nipple. Light

the other burners and observe that the gas pressure complies

with the gas standards in force.

o IMPORTANT: On completion carry out a gas soundness

test.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 27 28

Nessun commento

Baumatic BHG602TCSS Manuale Utente Pagina 19