Baumatic HHC600 Manuale Utente Scaricare il pdf (Pagina 19)

o The cable connections must be in accordance with the diagram

located on the bottom of the hob (see above).

o You should use a good quality screwdriver to carefully, fully

tighten ALL of the terminal screws.

o If when the hob is first switched on, only two of the zones

work, you should recheck that the terminal screws are all

fully tightened. This should be done before contacting the

Advice Line.

o IMPORTANT: The appliance must NOT be connected to the

mains supply by means of a 13A plug and socket.

o The cable can be looped if necessary, but make sure that is not

Kinked or trapped when the hob is in position. Care must be

taken to avoid the cable being in contact with hot parts of the

appliance.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24

Nessun commento

Baumatic HHC600 Manuale Utente Pagina 19