Baumatic PI645 Manuale Utente Scaricare il pdf (Pagina 22)

d a

rature rise of 85°C above the ambient

temperature of the room it is located in, during

ng on size) or 600 mm worktop that is between

5 mm and 40 mm thick. The following minimum clearance distances

o 700 mm between the hob surface and the underside of any

o 55 mm clearance between the back of the hob surface and the

a kitchen unit. There must

be a gap of at least 150 mm between the side of the hob and the

aterial (e.g. wood). There must be

a gap of at least 50 mm between the underneath of the

You must make sure that there is a 5mm gap below the

underneath of the worktop at the front edge of the hob.

The adjacent furniture must be able to withstan

minimum tempe

Position

periods of use.

This appliance is classified as Class 3 and therefore is to be built into a

kitchen unit (dependi

must be observed:-

horizontal surface above it.

o 50 mm clearance around the sides and front of the appliance.

wall behind it.

o If the hob is positioned so that the right or left hand side of the

appliance will be near to the edge of

vertical surface of the kitchen unit.

o IMPORTANT: Underneath the appliance there must be a

partition made of insulating m

appliance and this partition.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 35 36

Nessun commento

Baumatic PI645 Manuale Utente Pagina 22